Field Tested: Rivendell Hunqapillar

bicycle-times-rivendell-hunqapillar-review-3

Rivendell Bicycle Works has been keeping steel real since 1994. It’s not about nostalgia or retrogrouchiness, but a true belief in the benefits and beauty of lugged steel and quality, sustainable component choices. This comes not just from appreciating the fine lugs and paint, but in knowing that your frame—and its components—will remain serviceable and repairable for many years.

Rivendell is also about fit, comfortable fit; with a more upright position than your average racer-shaped bike, but also with varying wheel sizes to better fit the full variety of humans.

Rivendell’s range starts with the road-only Roadeo and progresses through the line—each bike with a bit stronger tubing, more tire clearance and thus becoming more dirt-worthy, until you arrive at the Hunqapillar, the strongest and most fat-tire worthy of the gang. All Rivendells include braze-ons for maximum versatility, and the Hunq has three bottle mounts, front and rear rack, fender and fork low-rider braze-ons. There’s even a pump peg under the top tube, plus a kickstand plate on the chainstays for extra stability when parked.

bicycle-times-rivendell-hunqapillar-review-2

My interest in this bike sprung from over a decade of riding my Rivendell Atlantis, a bike that has seen many a week-long tour and quite a bit of dirt. But I have become interested in something even more robust. That thought process pointed me to the Hunqapillar with its Diagatube, that extra tube you see in the photos. It adds strength and stiffness to the 58 and 62cm frames. Plus, for lug counters there are two more than any bike without a Diagatube. That’s two more lugs that Rivendell had to invest in castings for, and two more you get to look at.

Parts

The stock Rivendell component kit is based on functionality, serviceability, and longevity, with less emphasis on gram-counting. Highlighting this is a selection of parts from Nitto of Japan. Granted, handlebars, stems and seatposts are not usually singled out like this, but Nitto offers many bar and stems that provide a wide range of fit with top-notch finish, a pleasure to behold for many years.

bicycle-times-rivendell-hunqapillar-review-4 

For drivetrain, Rivendell prefers mid-range Shimano stuff. Deore rear derailleur, Claris front, and Dura-Ace for the bar-end shifters. Let’s not spend too much time and money whittling the gram count, but instead pay attention to functional, long-lasting stuff. The cranks are from Sugino of Japan, another forged beauty fitting right in with the Nitto stuff.

Wheel-wise, Rivendell has been working with with Velocity USA and is now offering their 36-hole Sport hubs laced three cross to Dyad or (Rivendell designed) Atlas rims, topped with Schwalbe’s Marathon 700×50 tires, although I got the 50mm Big Bens as an upgrade.

For handlebars, I selected the Nitto Bullmoose Bosco with cork grips. The bullmoose style has been around since the early 1980s, and I was ripe to try them. I chose Paul Thumbies for old-school mountain bike-style shifting. 

Riding shakedown

Two thoughts came to mind on my first shakedown ride. First, “finally a bike that fits”. My 60 cm Atlantis was purchased a decade ago when I was only a mountain biker. I had thought the bike would be easier to handle on trails. True, but getting on this 62 cm Hunq has been a real eye-opener, giving me more space and opening my chest up for better breathing, especially when climbing.

bicycle-times-rivendell-hunqapillar-review 

But while totally in love with the Bosco handlebars we had originally picked, I took the liberty of switching them out for Albatross bars from my Atlantis to get my position a little more forward. For touring the Albatross bars can’t be beat, as they provide a wide range of hand positions. Most of the time I ride pretty upright, but it’s easy to slide the hands forward for stand-up climbing. If only they had a little less sweep, but Nitto is unable to bend their bars in the way I’d ultimately want them.

More Mods

My first voyage was a weekend camping trip, so I installed a Pass and Stow platform rack on the front and a Bruce Gordon on the rear. Both are made in California: one in Oakland, the other in Petaluma. Two great locally made racks, baby.

bicycle-times-rivendell-hunqapillar-review-5 

My first major ride was down a local San Francisco Bay path for a weekend of camping, which was mostly flat so I didn’t concern myself with how much I was carrying: four panniers, plus a bag on top of the Pass and Stow, due to large amounts of beverages and musical instruments. And a kite. The Hunq handled this well as I pushed it to its limits. Super solid, but not quite as stiff as a Surly Karate Monkey with its much larger down tube and smaller triangle.

In daily use with varying loads the Hunq was bulletproof. I would sneer at railroad ballast, curbs, drops, and most everything else. Its versatility is enhanced by the many positions of the Albatross bar, from weight-forward climbing to upright cruising.

My final test ride was on Groundhog Day, a 14-hour day including 40 miles of pave and 20 miles of dirt, some of the rutty, fire road variety found in the Marin headlands. This is where the touring and mountain bike personalities of the bike came to fruition. I had plenty of gears and traction on the way up the hills, and strength and stability and fat tires to conquer the ruts at speed on the way down. I did hanker for disk brakes on a couple of steep technical occasions, but I’m happy with the Shimano cantilevers 90 percent of the time.

The $2,000 frameset is made in Wisconsin, and includes frame, fork and FSA headset. You can get a standard build kit for an additional $1,350, sans pedals, seatpost and saddle. Mix and match as you wish from Rivendell component choices; look to spend between $3,600 and $4,600 on a complete Hunqapillar. Lead time is typically four months, but at any given time Rivendell may have your bike in stock. A huge bonus is that your bike will be lovingly built by the folks at the home office in Walnut Creek, California (well worth a visit if you’re in the ‘hood).

Carrying things has become very important to me, as well as a solid ride. And I want to run as fat a tire as possible, with or with out fenders. I want to hit the dirt. I want to tour. The Hunqapillar does it all quite well. It looks great while doing it. It attracts attention as well. And yes it is more of an investment than your average bike. But you wouldn’t be reading this if you wanted an average bike.

Key stats

  • Price: $2,000 (frame, fork, headset); $3,600 and up (complete)
  • Sizes: 48, 51, 54, 58, 62cm (tested)

Editor’s note: This review originally appeared in Issue #34 of Bicycle Times. To make sure you never miss a product review, order a subscription and you’ll be ready for the everyday cycling adventure.

 

Print

The best and worst of NAHBS in photos

nahbs-2015-1-23

Being around the industry as long as I have I know a lot of people, many of whom congregate once a year in a different location to look at the fashionshow we call The North American Handmade Bicycle Show. Where artisan framebuilders show off their latest and greatest creations, which are judged and given giant plastic bowling trophies. Fun fun fun with my favorite people. While totally distracted the whole time, talking to old friends and new,I did manage to get a few random shots off which I will now share with you.

See what I mean? First guy I run into walking in the door is this guy. Ted Wojcik, who I have not seen in maybe 20 years. He’s been makin bikes closer to 30. Might have been the first custom builder to work with Dirt Rag. Now he’s working with Fiefield to bring out some E-bikes.

nahbs-2015-1

This happens a lot. Makes it hard to look at bikes sometimes, but thankfully I like people better than bikes. Geoffrey Halaburt is everywhere, we shake hands quite often. He’s here representing maybe the nicest guy in the world, Steve Potts, who I did not get a photo of because we were busy talking about life and family.

nahbs-2015-1-2

Then there’s this guy. Contrary to popular belief, and the sentiment of this photo, I do have a lot of respect for Zap despite him having bigger holes in his ears than I do. As you can see, the feeling is mutual.

nahbs-2015-1-5

OK, Bikes. Black Sheep brought some amazing creations as usual, and while awesome, I couldn’t help but just zoom in on this rad head badge by Jen Green.

nahbs-2015-1-15

Another cool Titanium purveyor is Moonmen. I was fortunate enough to ride with these guys and try these bars, they fell right into my hands and I want to get a hold of a pair for myself.

nahbs-2015-1-33

Back to humans. Here’s the boss of the show, Don Walker. I don’t care what anyone says about Don, I have a metric ass-ton of respect for him and what he’s done for our community. Be thankful.

nahbs-2015-1-34

Sometimes bike porn comes in the ogling of a bare frame. Here Jeff Archer of MOMBAT checks out the work of DiNucci Cycle’s best lugs winning frame. Perfection!

nahbs-2015-1-7

Another one of my favorite people, Erik Noren of Peacock Groove. Note that Shimano provided a bunch of their STePS electric drivetrains for builders to have at it. Each found a different way to attach the STePS unit to the frame.

nahbs-2015-1-13

Here’s another example from Sycip.

nahbs-2015-1-6

Yes, there were many E-bikes, and many fatbikes. On the other side of the spectrum was this carbon fiber something. The Signorina from Abbott Cycles takes the objectification of women to a new level. Definetly sucks that this is how women are represented here. Especially since this object was one of about 10 women I saw at the whole show.

nahbs-2015-1-11

Subtle. Which leads me to this human down the aisle. Look! A living! Female! Framebuilder! Yes, they do exist. Her name is Julie Ann Pedalino and she’s from Lenexa, Kansas and she’s just getting started in this building thing and I’d sure like to see a lot more real women at shows like this and less old boy network. Fer sure (Ok there was Cayley Baird at The Rille booth and Karen Brooks journalizing and Anna Schwinn and Kristen Legan but I am not going to run out of fingers any time soon).

nahbs-2015-1-23

Here’s something from Rody over at Groovy Cycle Works. Another one of his bikes won best of show, but I am all about funk, so take a look at this.

nahbs-2015-1-23

Ok, so here’s one more gift. For Sarah Prater’s wedding. This Shamrock Cycles cross bike was hand painted by Kate Oberreich with 585 individual paper airplanes representing the 585 days of Sarah and Josh’s courtship. Now if that ain’t love.

nahbs-2015-1-31

Well that’s all I have for today, hope you got some enjoyment looking here. There’s plenty of bike porn out the on the web, so feel free to look some up. NAHBS was awesome as usual, it really is the best this bike business has, and I’m glad I was there. Next year, Sacramento, CA! Oh wait, I have one more geezer pic….

nahbs-2015-1-32

 

Print
Back to Top